IBTimes UK reminds its readers that it will not be held liable for any mishap. Users are also advised to verify that their devices meet following requirements. Step Download Android 4. Extract the downloaded zip to get a. Step Download Odin v3. Extract the zip to get Odin3 v3. Step Switch off the Galaxy S3.
Place the device in Download Mode by pressing and holding Volume Down and Home buttons together and then press the Power button until the construction Android robot and a triangle appears. Now press the Power button to continue to enter Download Mode. Step Plug in the USB cable to the phone to connect it with the computer while it is in Download mode.
Wait for some time until Odin detects the device. Also, the successful connection will be indicated by a message saying Added in Odin. This step is likely to take some time. If Odin still fails to detect the device, then re-install USB driver. Step Configure the Odin settings. Check the Auto Reboot and F. So in this section, we will firstly tell you how to enable or disable the option of USB debugging on your Android device running from Android 2. Before we go on, one thing you should know in advance.
As with further versions of Android, security is getting tighter and so are the options on your device. Previously there were direct options to enable USB debugging on the old Android versions, and nowadays you have to first enable Developer Options to breakthrough the USB debugging option on Android 4.
Developer Options is a great way to enhance the functionality of your phone, but improper use of it could affect the way your device functions. Hence, you should know exactly what you are doing before proceeding any settings.
And we advise you to avoid configuring any other settings in Developer Options after enabling USB debugging. In order to pick out the right way to enable USB debugging on your Android mobile, you should first find out what version of Android you have on your device. Step 2: After you enabled the Developer mode on Android, now you have to go back and you will find there is the Developer options menu. Once you enter it, you can find the USB debugging options.
Step 2. Once you have enabled the Developer options, you just simply scroll all the way down until you see the USB debugging option, and check it. Step 3. If you are using Windows 8, you may need to change some settings first. Pay attention to a prompt window on your device screen. Tick 'Always allow from this computer'. Every coin have two sides. Rooting your Android has its own advantages and at the same time disadvantages. It is a matter of weighing pros and cons. Android rooting is a modification process to the original system, in which the limitations are removed and full-access is allowed and thus resulting in the ability to alter or replace system applications and settings, boost your phone's speed and battery life, block ads in any app and even facilitate the removal and replace the device's operating system by flashing a custom one.
However, rooting your device will immediately void your warranty KingoRoot will employ multiple exploits on your device,. The root process will probably take several minutes. In the rooting process, your device may be rebooted several times. Be patient, it is normal thing. Of course, perform a backup in its entirety before you proceed lest Murphy decides to drop by.
This works only with factory unlocked Android handsets, so if your Galaxy S2 is tied or locked to a carrier, it will not work at all. Firstly, download the Android 4. Once done, disconnect the USB and turn the handset off. Following that, boot your Galaxy S2 into ClockworkMod recovery. This can be done by pressing and holding the Volume Up, Power and Home buttons simultaneously until the Samsung logo decides to appear on the display.
When you are in ClockworkMod recovery mode, run a full data wipe before anything else. The moment the ROM installtion is complete, perform the previous step again, although you will have to select the Google Apps ZIP file this time around to make sure that the Google Apps package is installed.
Once the Galaxy S2 has booted up, you should be able to see Android 4. Source: International Business Times. Firstly on installing Android 4. After installing GAPPS the whole language changed from english to chinese and the version remains the same that is 4.
0コメント